The irrigation guns are made of plastic, they are mounted directly to the end of the sprinkler tube, screwing them very easily. By rotating the external part you can change the various water jets. Those who do not want to create an irrigation system, or do not wish to bear this expense, need to connect an irrigation hose to a tap through a socket and can use this type of gun. It is made of quite resistant plastic, it is simple to use and very handy. The importance of the various water jets is fundamental because each plant requires a different amount of water and above all it must be irrigated in a very specific way. Therefore, using a single accessory you can have different functions, so it is also a rather useful purchase. The water tap can also be left open, while only the outlet from the irrigation gun is closed, so as to avoid having to always open and close the tap.

The irrigation gun is a rather requested accessory especially by those who have different species of plants in the garden. In this way, water consumption is also optimized since only what is actually needed for irrigation is used, directing the jet. Most irrigation guns all have the same function and feature various water jets. It is an element that offers good durability over time because it can be safely left outside and does not suffer any damage due to temperature changes. Using a hose reel cart, use will certainly be easier because it will also be possible to transport it to any corner of the garden. The jet of water that comes out of the gun still has a certain pressure and this guarantees it does not locate the watering in too small areas. It is therefore a convenience for those who deal with gardening and have not thought about an irrigation system.

As mentioned in the previous paragraph, the choice is limited because the characteristics that identify the irrigation guns are very similar. The only difference is that some models may have fewer water jets. However, since this is an expense that is faced only once, it is almost always preferable to choose a rather complete and good quality model. The mechanism for changing the jet of water is quite simple, because it is enough to twist the end. When you buy the gun you must already have the sprinkler hose to connect it to, otherwise you must buy that too. By defining the area to be watered, it is also possible to precisely determine the length of the hose. The irrigation hose is essential as it is essential to have a source of water available in the garden, which can be a fountain or an outdoor sink. Even if during the design of the garden you had not thought about the construction of the system, we must never forget that a source of water is necessary for the good health of the plants.

Irrigation guns can be purchased at gardening outlets or at DIY stores. The customer at the time of purchase can always refer to a descriptive card that allows you to know the characteristics of that particular object. The same description is present on the websites that deal with articles for gardening. Online consultation is certainly much faster and the customer has the possibility to place the order at any time without any restrictions. To know the method of payment and delivery times, it is necessary to read all the information contained within the site. Regardless of where you decide to purchase, the irrigation gun must be tested immediately to check for any faults. It is of course advisable not to turn the ring nut for changing the water jet too frequently, otherwise it could break in the long run. Usually the water jets used are two or at most three. When you buy the irrigation gun, inside the package there are all the indications that should be followed so that it can guarantee a good duration over time. It is also advisable to avoid shocks that could damage it as it is plastic. The irrigation gun is an important accessory for gardening that is sometimes also purchased by those who have a specific irrigation system for the garden.