Added by on 2017-01-05

http://www.GrowAce.com — The Inline Duct Blower features high power motor and an aerodynamically designed shape for any soil, soilless, aeroponic, or hydroponic setup. It is able to move air through long stretches of ducting , grow light reflectors or carbon filters. Exchange stale air with fresh air by using the inline duct fan for an intake or exhaust. Help keep temperature or humidity under control and cool your grow room quickly. Features: 1. Brand new in box ready to be operated upon arrival 2. Powerful and efficient performance 3. High performances & static pressure to overcome the resistance caused by long ducting 4. Backward curved impeller to ensure quite operation possible 5. Balanced motor with permanently lubricated ball bearings for vibration-free operation & continuous running 6. Moisture resistant – great for use in damp environment 7. Extended collar and lip for easy duct hook-up 8. Solid metal construction with powder coated housing 9. Pre-mounted leg stands for horizontal/vertical mounting or on floor using 10. Suitable for domestic, commercial and industrial applications 11. CE certificated Applications: * Hydroponics * HVAC * Electronic cabinet cooling * Clean room modules * Heat exchangers * Air filtration * Air showers * Pharmaceutical equipment * Semiconductor industry Related PostsHydroponics How To: Choosing the Right Homemade Hydroponic SystemHydroponics How To: Choosing the Right Homemade Hydroponic SystemHow to Set up a Hydroponic Drip System for Indoor Gardening | Versagrow | GrowAce.comHow To: Choose a New Roof for Your HouseHow to start growing hydroponics from seeds with rockwool cubesEasy Vertical Hydroponics Tower Garden – Even Beginners Can Grow Food

Leave a Reply

Your email address will not be published. Required fields are marked *

*

 

14 Comments

  • gracie1021 10 months ago

    i have just bought a 3x3x6 tent and a 600w dimmable hps. is that what this set up is? will a 4in inline fan and duct be suitable for cooling the light and filtering the air? i plan on pushing the air outdoor via dryer vent.

  • CooPLooPs4twenty 10 months ago

    Can you use a Wire ducting with say a fan around 1000-2000cfm or will it just crumble under the pressure?

  • Daniel Bull Runner Lamb 10 months ago

    Why are they so noisy i have a stealth room and this thing sounds like i there is a jet inside my room, how can i make it sound like a regular Fan??

  • J Griffin 10 months ago

    If I don't have an air cooled reflector as shown in this video, can I just place the fan outside the tent and connect it to the charcoal filter inside for adequate air circulation?

  • If you have a small enough tent, lets say 2'x2'x40", like mine is, do you even need anything else other than passive intake with one of those fancy fans? I ask because where I live has an average ambient temperature of 85 degrees. And I wanna keep the temp inside my tent exactly the same. Is one of these fans good enough to maintain that temperature or do I need an active intake fan also?

  • Hannible 100 10 months ago

    Bit noisey? 

  • GrowAce 10 months ago

    You don't need that particular setup. What I do for a budget grow is just connect the duct fan on the roof of it and have the air be exhausted. If you have a air-cool reflector, just get some ducting to connect the fan to the reflector for cooling. If the smell of your garden is an issue, then the setup we show in the video is what I recommend. Hope this helps!

  • Romeo campos 10 months ago

    i have a 5x2x10 100cfm is what i require but im kinda broke is it ok, to use LEDwholesalers GYO2402 6-Inch 240 CFM Air Duct Inline Hydroponic Booster Fan? or do i need this one to suck air trough filter blow trough cooltube toweards outside and anoter one like yours to pull in air? mine isnt a grow tent its an actual room. but its an outdoor closet..
    

  • Fred Edish 10 months ago

    And last week it was LED……tried and true high pressure sodium…it just works the best….

  • StuffFromMe 10 months ago

    Wow, people need to start using new technology; HPS and MH are just way to hot and inefficient. You need to start using MI lights, just google "biosonictech" and look at the MI lights available.

    MI lights are def the way to go these days. Good luck!

  • superdaddy6945 10 months ago

    wow i have a 40x40x78 ,and my tent did the same thing in the video all the walls puled inword so on the out side i have a cage fan from stanley three speed on all day and night blowing in vent opening.but this is the veg stage.what can i do when i go flowering and switch too 12/12 can i put the inline on a timer and have it come on when the lights are on?

  • Jimmie Lavender 10 months ago

    Great informative video thank you.

  • GrowAce 10 months ago

    @MPlace08 Great question! Unless you allow air vents to help decrease pressure in your grow tent, 190 CFM for that size grow area will be too much. We carry booster fans that are smaller CFM at GrowAce.com that can accommodate your grow tent.

  • GrowAce 10 months ago

    @DogWarrior327 Thanks!