Learn how to install 3 tab asphalt shingles on a lean to shed. This video shows:
-How to install the roof drip edge
-How to install roofing paper or felt
-How to make and install roofing starter strips
-How to install the asphalt shingles
-How to cut the end shingles off
-How to finish the lean to shed roof ridge
-How to install the ridge metal on the lean to shed
For Shed Plans to this and other sheds please visit our website at
https://www.icreatables.com/sheds/shed-plans.html
For more Shed Building videos check out our YouTube Channel: https://www.youtube.com/user/icreatablestv
Subscribe to the iCreatablestv channel: http://www.youtube.com/subscription_center?adduser=icreatablestv
WARNING: These projects can be dangerous, posing risks of personal injury, or property damage, and in some cases, death. There may be the possibly other risks of which I am not fully aware. Use of video content and or website information is at your own risk.
Video Rating: / 5
Excellent video! I want to build a small lean-to on the side of my house and I wasn't sure how to get the roof water tight, and this video answered all the questions I had
Awesome video. Just one reccommendation……get some new jeans. Seriously
This is partially correct, he forgot to install the starter strips along the left and right side of the roof. Other than that everything is done correct.
thanks!
Great vid. Though what way would the flashing be if you were leaning the shed against a brick wall? I.e. No back panel to the shed (the wall is the back panel)
I really appreciate the video.
Use by lines you have crooked keys
This is what I needed, though everywhere sells the capping for apex roofs. Can I use these and bend?
Really nice video. Well done. Great presentation. I like your laid back style, and the info is GREAT!! Thank you so much for posting this for all of us DIYers. 🙂
7:37 Not a very good Lay out of the Job small 1/2 & 1inch wide shingle ends left. they will fall off or be blown off not a nice job
just to warn folks…when ever you rest a new package of shingles on its width side…DO NOT do that..I learned the hard way…I rested a pack on its side…to open up my back gate..and the damn things crumpled on its self…causing a breakage on the shingles itself….
We've just about finished one of you 6×16 lean-to sheds! Great instructions!! One question, what is an underlayment appropriate for low slope 2:12 roofing with shingles?
The best video on this subject on Youtube.
Amazingly clear and well done. Fantastic job. Thank you for a great set of tutorials.
I just built a large lean to from scratch. This was a big help!
A tip for weekend builders who have never roofed and likely spend too much time behind a desk all week (like me). Remember to peel off the cellophane 'tape' off the tar strip before laying the shingle down. Yes I screwed this up on the very first shed roof I did years ago because it was hot out it was not immediately apparent that there was even tape there. At the time I didn't know enough to think that the tar was there to glue things together. Yeah I know dumb but live and learn. Thanks for the great video!
great video, well explained and efficient!
Thank you for this video!! It is EXACTLY what I needed. I love how you put it together with the F FWD video and terrific voice over. It's like you were reading my mind and explaining all the confusing bits!!
GOOD JOB thank You
Why don't use just keeps on installing the shingles until u reach the top of the roof instead why restarting at row 7 ???