Added by on 2018-08-08

Learn how to install 3 tab asphalt shingles on a lean to shed. This video shows: -How to install the roof drip edge -How to install roofing paper or felt -How to make and install roofing starter strips -How to install the asphalt shingles -How to cut the end shingles off -How to finish the lean to shed roof ridge -How to install the ridge metal on the lean to shed For Shed Plans to this and other sheds please visit our website at https://www.icreatables.com/sheds/shed-plans.html For more Shed Building videos check out our YouTube Channel: https://www.youtube.com/user/icreatablestv Subscribe to the iCreatablestv channel: http://www.youtube.com/subscription_center?adduser=icreatablestv WARNING: These projects can be dangerous, posing risks of personal injury, or property damage, and in some cases, death. There may be the possibly other risks of which I am not fully aware. Use of video content and or website information is at your own risk. Video Rating: / 5 Related PostsHow to Build a Shed – How To Install Asphalt Roofing Shingles on a Shed – Video 13 of 15How To Measure And Install Multi Rib Metal Roofing Part 1“Asphalt Shingles Roofing – How to Install Valley” by RoofRepair101ROOFING: How To Install Laminated Asphalt ShinglesRoofing – How to Install Asphalt Shingles – Getting Started WalkthroughHow to Felt a Shed Roof – Fit long life Roofing Felt

Category:

Green Roofs

Tags:

, , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

 

20 Comments

  • Lakelover597 1 month ago

    Excellent video! I want to build a small lean-to on the side of my house and I wasn't sure how to get the roof water tight, and this video answered all the questions I had

  • Alex Zabala 1 month ago

    Awesome video. Just one reccommendation……get some new jeans. Seriously

  • Cris Rome 1 month ago

    This is partially correct, he forgot to install the starter strips along the left and right side of the roof. Other than that everything is done correct.

  • jizzlo dizzlo 1 month ago

    thanks!

  • mrdmce 1 month ago

    Great vid. Though what way would the flashing be if you were leaning the shed against a brick wall? I.e. No back panel to the shed (the wall is the back panel)

  • D Johnson 1 month ago

    I really appreciate the video.

  • Ed Jacobs 1 month ago

    Use by lines you have crooked keys

  • ian porter 1 month ago

    This is what I needed, though everywhere sells the capping for apex roofs. Can I use these and bend?

  • Dylan Reese Marshall 1 month ago

    Really nice video. Well done. Great presentation. I like your laid back style, and the info is GREAT!! Thank you so much for posting this for all of us DIYers. 🙂

  • 1995dresser 1 month ago

    7:37  Not a very good Lay out of the Job   small  1/2 & 1inch wide  shingle ends left.   they will fall off or be blown off  not a nice job

  • Showemright YTchannel 1 month ago

    just to warn folks…when ever you rest a new package of shingles on its width side…DO NOT do that..I learned the hard way…I rested a pack on its side…to open up my back gate..and the damn things crumpled on its self…causing a breakage on the shingles itself….

  • Seth Friedman 1 month ago

    We've just about finished one of you 6×16 lean-to sheds! Great instructions!! One question, what is an underlayment appropriate for low slope 2:12 roofing with shingles?

  • Widow Twankey 1 month ago

    The best video on this subject on Youtube.

  • Jack Donaldson 1 month ago

    Amazingly clear and well done. Fantastic job. Thank you for a great set of tutorials.

  • Steven Baumann 1 month ago

    I just built a large lean to from scratch. This was a big help!

  • Mike B. 1 month ago

    A tip for weekend builders who have never roofed and likely spend too much time behind a desk all week (like me). Remember to peel off the cellophane 'tape' off the tar strip before laying the shingle down. Yes I screwed this up on the very first shed roof I did years ago because it was hot out it was not immediately apparent that there was even tape there. At the time I didn't know enough to think that the tar was there to glue things together. Yeah I know dumb but live and learn. Thanks for the great video!

  • Michael Weatherby 1 month ago

    great video, well explained and efficient!

  • Jake Hammersley 1 month ago

    Thank you for this video!! It is EXACTLY what I needed. I love how you put it together with the F FWD video and terrific voice over. It's like you were reading my mind and explaining all the confusing bits!!

  • Di Si 1 month ago

    GOOD JOB thank You

  • Did i hurt Your feellings 1 month ago

    Why don't use just keeps on installing the shingles until u reach the top of the roof instead why restarting at row 7 ???