This is an instructional video to show how you can make a cable hung planter boxes out of a vinyl fence posts.

Here is my Instructable Instructions:
https://www.instructables.com/id/Vinyl-Post-Hanging-Planter-Boxes/

Supplies:
Vinyl Post – 5”x5”x8’ = QTY 1
Vinyl Post Caps = QTY 4
Vinyl Fence Screws or White Screws 3/4” long = QTY 8
Cable Ferrules 3/32” = QTY 4
Cable Stop 3/32” = QTY 2
Cable Thimble 3/32” (1/8” will be fine if you can not find a 3/32” one) = QTY 2
2 1/2” Screw Hook = QTY 2
1 1/4” Washers = QTY 4
1 3/4″ Washers = QTY 4
1/2” Pipe
12’ Long 3/32” Thick Cable
Weed Barrier
Dirt
Plants

Tools:
Hacksaw
Cable Cutter
Cable Crimper
Drill
1/8” Drill Bit
Marker
Tape Measure

Additional Supplies can be used “But not in Instructions”:
• Drip system

MUSIC:
Deliberate Thought by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://incompetech.com/music/royalty-free/?keywords=deliberate+thought
Artist: http://incompetech.com/

DIY Vinyl Fence Post Hanging Planter Boxes

| Vertical Gardens | 2 Comments
About The Author
-

2 Comments

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>