Today i’m showing you step by step HOW TO MAKE VERTICAL HYDROPONIC SYSTEM at home,
the easiest way to make HYDROPONIC SYSTEM with 4” PVC pipe
How to Make DIY Vertical Hydroponic System
I`m using 3 ft long of 4″ PVC pipe ,Make a 3 ” cut on the marks , using saw or
multi tool,take your Stove or heat gun and gloves ,make sure
you are in ventilated area.start heating up the both sides of the cut ,
about 2min ,Once the PVC is Hot enough gently start pushing your Net Cup
into the cut I’m using 50 mm Net Cup,Don’t push too hard ,otherwise the PVC might tear up at
The ends of the cut
WARNING ! IT’S HOT !
Repeat the same process , until all done
Spray the PVC if you want to Hide the burn marks
we need 3,5 ft long of 1/2 ” of PVC pipe
Push the pipe inside
Now place the two elbows ( make U- shape )
At the top of the pipe
Now Hang up the pipe and connect
IT to the water pump
With simple steps , our vertical hydroponic system
is ready to use .
thanks for watching Don’t forget to like & subscribe
for more DIY videos
#DIY #HYDROPONIC #HYDROPONICSYSTEM
Video Rating: / 5

DIY _ How To Make Hydroponic Tower system