Hi Youtubers! this is my last video about shingles installations, we do about 2 shingle jobs per week, this week we started this house on tuesday , removal, wednesday plywood installation, thursday and friday shingles installation on the main house, barely walkable, please use your harness at all time, I do this all the time , so I take my precautions before I step on any roof.
only thing I notice about your valley is your starter row on the metal follows a chalk line snapped parallel to the center of the valley. as water collects in the valley the volume of water increases near the bottom so at the top the line should be one inch from the center and at the bottom it should be further away approximately 1 1/2 inch over twenty feet. this allows water to shed properly and flow as the gap expands toward the bottom. This also decreases capillary action. I like your work.
It looks good but california style valley cutting is a cheat and where is the logic: I don't use a harness on the roof but I have a hardhat on, on the roof. Lol. Good vids though all together keep it up! 🙂 and that short row @ 8:56 could've been avoided by dropping 3-4 rows before your tie in slightly so as to not have one that is so noticeable…
Mr Garcia, What exactly are your "special shoes"? i hear that like skateboarding shoes work really well on roofs
8:57 you cheated that one row almost half way down the shingle :P…lol
short course on top and Ridge cooked
good job
i love mexicans
muy buen trabajo dejando los clavos en el join. liqueo seguro.
that is hard work my friend….you sure did a lovely job.
Is the chimney finished. The Chimney is to short. No terra cotta tile liner inside the chimney.
What shoes do you use? Thank You
There was a very low course
Do you have any "How to" videos on metal ridged roofing on motor homes?
hi what do you use for shoes on something that steep?
can fat ppl be roofers
can fat ppl be roofers
makes the house look cleaner
como andamos amigo eric. oiga yo soy supplier de shingles . If u can do a video when the roof suppliers areive and deliver shinglea ill be very greatfull . Thanks bro
So your reason for not removing the slats is that it would take too long? Then why waste money on radiant barrier if it ain't going to work?