Aquaponics grow tower build, Instructional video!—inexpensive and simple techniques—with tips on tool handling, jigs and fixtures. Cut thousands $ off your aquaponics build!
Aquaponics grow tower build, Instructional video!—inexpensive and simple techniques—with tips on tool handling, jigs and fixtures. Cut thousands $ off your aquaponics build!
You must be logged in to post a comment.
what gph are the drip system you are using
Very helpful information, thank you for taking time for making a great video and sharing your knowledge!!
I'm surprised this video doesn't have more views. It is really very good. Thank you for putting it together.
how can there be 10 dislikes?
wow you have some great ideas . the cotten rope is a great idea as is your use of jigs. I do have a question . I noticed that you only have one row of slots . could you not put 2 or 4 in the same pipe ? staggering them of course. or is a 3 inch pipe to small for that.
you could sell those tapperd things, if I were local id buy them, shout out from Australia
I started my first Grow Tower this afternoon. Holy-Moly! Extremely time consuming to form each hole! And…if the plastic gets too hot it starts to scorch; too little heat and it likes to tear. Definitely a learning curve! I found that drilling holes at the end of the crosscut slots helps lessen tears.
Excellent design. This solves a lot of problems I've run into building these towers. What grow media do you find works best in towers? How well do plants grow with/without media?
tooooo much time
Hello Don, this is a great video. Will you please consider selling me 4 of the round wedges. Thanks
Thank you! The best instructional video I have watched on this so far.
do u think a wooden door stopper would work for the wedge ?
I've never heard it called a chop saw before…
You have some great ideas for jigs and tools. Thanks you have given me some great ideas. I some times use a short piece of heat shrink tubing to keep the ends of line from fraying. It doesn't get sticky like tape.Thanks again.
Thank you very much that your imformition
do you have to put some kind of medium in the pipe itself?
great vid Don -was the wicking cord successful-would be so much less maintenance than spray tip nozzle
This was so helpful. Thank you so much!
Is PVC food safe?
You say thin wall PVC. is it schedule 40 or even thinner? looking to do this to add to my setup. Thanx