Added by on 2016-03-20

12v solar powered hydroponics & greenhouse that I built over 3 days. It was meant to be cheap and inexpensive but the costs started to add up. Learn how to make your own just like this one. Please comment, this is my first attempt and I’d like to hear any suggestions you have for this. http://www.makehydroponics.com Related PostsHomemade hydroponics – How to make a deep water culture (DWC) systemDevelopment Stage 2014, Homemade Greenhouse, VerticalHome Hydro – Homemade Hydroponics 5 gal bucketHydroponics Growing System Homemade PVC for BeginnersDiy Cheap Indoor Hydroponics Growing System HomemadeHydroponics growing system: How to build a homemade DIY Deep Water Culture or DWC growing system

Leave a Reply

Your email address will not be published. Required fields are marked *

*

 

20 Comments

  • Dan Roy 1 year ago

    Have u considered smoothing the bore holes & cleaning the system of PVC tras? Plugs the pump.

  • Dan Roy 1 year ago

    Are u small enough to fit in the greenhouse?

  • Cathern Falck 1 year ago

    I made it, learned on inplix website. great solutions I think.

  • zzdfhgdhd 1 year ago

    so no concern of the chemicals leaching from the PVC? I know one is to avoid farm fish because of all the PVC.. I would assume the vegetables would absorb the toxins as well

  • Sharon Middleton 1 year ago

    you made little hoop house support hydroponics that is brilliant.

  • Lyhout Hak 1 year ago

    your fan way too small. Smaller that my computer fan

  • David Gray 1 year ago

    The best way to transform your gardening with hydroponics system is to take full advantage of hydroponics pro, without the need to try and fail such as them before!

  • daniel sukamto 1 year ago

    THAT IS NICE BRO NAMA SAYA ANDI KAPAL AZIMUT SELAMAT UNTUK MENGERJAKANYA GOOD BYE    AKU ADALAH SUPERMAN

  • Dave Bainard 1 year ago

    You don't need the thermostat for the fan. Just hook the panel directly to a 12 volt fan. When the sun comes out, the fan starts up by itself. Ideally have the fan near the top of your greenhouse facing a light weight baffle that will open when the fan is on and close (with its own weight) when fan shuts off.

  • Javier Torres 1 year ago

    where you bought the solar panel and pump?

  • lostinthewoods357 1 year ago

    Very cool! Thanks for sharing!

  • Anto Frank 1 year ago

    how punching holes in gutter for hydroponic plants?

  • Jack Waters 1 year ago

    Moving videocam slow.

  • HortonKansas 1 year ago

    Thanks for taking the time to post this.

    

  • Greg Mundwell 1 year ago

    Hydroponics is a great system but it also have some drawback, you have to buy some "plant food", nutrition and supplements that can be high-priced. Before building any hydroponics system, it is best to look at the benefit from aquaponics system, which could automate 95% of work.

  • KustomKulture1107187 1 year ago

    Don't worry about the costs cause the saving in the end will be well worth it.

  • Kwesi Coatts 1 year ago

    I have just made my very own aquaponics system. It was actually simple and easy and it appears and operates just as the ones that charge thousands more, by using this guide
    Look at below blog for more information:
    help1.info/aquaponics-guide

  • Larry Hayes 1 year ago

    This will make plants frigid, they will still sense the temp change and go into winter mode. It should be a constant summer underground water temp like around 68 degrees. Also note that this is another down side of using tubes, they spread your water density out and transfer outside temps to the water more easily. Again creates drama in water temp causing plants to change to winter mode.

  • Larry Hayes 1 year ago

    4. I like the idea of burying your sump, but you should know that you need to get the tank 2 feet into the ground to get below frost zone. As long as the water is constantly moving, you should be ok, but it could freeze and kill your system at current depth. Also, at this depth, it could cause a dramatic temp change in your water.

  • Larry Hayes 1 year ago

    3. Because you are using tubes and you iced a hole saw, your openings are reducing the amount of water you can allow into your system to your plants. A flat opening will allow you to raise your water level closer to your plants roots for initial starts.